FDS Glass Corporation                       

Glass Tempering Furnace

Advanced Configuration

English, IngésEspañol, Spanish


S-1 series glass tempering system is a new generation systemthat contains many patents developed by both Chinese and foreignspecialists. It has the distinctive advantages in glass flatness andremoval of stress marks, and it's praised as the'completely-flatfurnace', a new generation produce super flat glass without stains

Super flat: Flatness: < 0.8%, wave form: < 0.5%
Without stains: > 15° for glass with thickness of below 20 mm, and there are no visble stains

Minimum glass deformation: Northglass is the only one in the world to adopt allprecisionrollers in the flat glass tempering section In this way the problem of glass deformation is completely solved to maintain the original optical property of the glass.

Stress marks on tempered glass removed: Northglass is the only one in the world to adopt all ceramic rollers in the flat glass tempering section In this way the problem of glass deformation is completely Optimum glass flatness: The air blowing distance can be separately controlled by computer for the upper quench and lower quench, so it' s easy for the adjustment and control of the glass flatness 



High product quality:
Forming technology by rollersmake sure an accurate and smooth glass shape to benttempered glass.
Easy operation:
Glass curvature is automatically controlled by computer without any mould. Whole-process automation is realized for production.
Very low energy consumption:
The energy consumption of the machine is very low with good thermal insulation and reasonable energy saving.
Human engineering design:
Glass loading is easy because the rollers of the loading station are higher than the side casing. Under the loading station is an board can be installed A Zebra reflective board can be installed at the unloading station for glass quality inspection according to customer's requirement
Minimum size:
200mm X 350mm, smallest curvature
radius is 280mm.
Glass sheet size:
Maximum size 3500mm X 3600mm. 




Strong production capacity:
Flat or curved tempered glass of jumbo-size can be produced by the machine
Easy operation:
Glass curvature is automatically controlled The whole process is of automatic control and automatic diagnosis with friendly man-machine interface.
Perfect production process:
Variable rollers are used without mould for accurate glass forming which is smooth without spherical surface
Very low energy consumption:
The energy consumption of the machine is very low with good thermal insulation and reasonable energy saving
Advanced heating method:
Radiation boards in matrix arrangement for heating ,intelligent PID power adjustment and fuzzy spot temperature control.
Human engineering design:
Glass loading is easy because the rollers of the loading station are higher than the side casing. Under the loading station is an illuminating light for glass inspection A Zebra reflective board can be installed at the unloading station for glass quality inspection according to customer's requirement.
r_
Biggest bent glass sheet:
Max. size 2850mmx12800mm