FDS Glass Corporation                       

Insulating Glas Machine: Space Bending

English, IngésEspañol, Spanish


BLQZ01 AUTOMATIC SPACER BENDING MACHINE
BLQZ01 AUTOMATIC SPACER BENDING MACHINE

MAIN FEATURES:
• The startup was controlled by single button, and it is adopted touch screen.
• The head of the cutter can be adjusted automatically. It can operates without changing the cutter aluminum spacer when the width of the spacer is bigger than 6mm.
• Fuji servo feeding system with digital control, bending angle. digital control system, Siemens control system.
• To reconnect the ends automatically, and to prevent the ends being clashed intelligently.
• Judging the processing data intelligently.
• The remanent can be processed again and no tailings exist.
• Cutting the feed supply automatically when the processing is done.
• Counting the output.
• Remaining dormant state to save energy consumption when there is no processing.
• Adopting the emergency stop.
• Adjusting the bending speed automatically.
• Performing the processing at a high speed, efficiency and continuity.
• Adopting an automatic storage tank which can feed the material automatically and reconnect the aluminum spacer automatically.
• Can bend both the arc and shaped aluminum spacers.
• Manual control to debugging the trial run. The head of the cutters is adjustable and processing data can be figured by customers themselves.
• Indicating the relevant information when there is no supply, when it is in dormant state, when there is any malfunction, when it is in working state, and even can indicate debugging information for any wrong with the machine.
• Adopting clock to display the current date and time.

PARAMETER:
Aluminum bar size width:6mm-24mm
Length:2000-4000
Aluminum spacer size min 250*150mm
max 2000*2000mm
Processing speed <30s/pcs(1000mm*1000mm)
Power supply AC220V,50HZ,2.5KW
Air supply 0.6MPa
Date number set 4 groups of specification*8 kinds of
size*9999 piece at the same time.
Figure Dimension 10500×2100×2200mm
Total Weight 1800Kg



Desiccant Automatic Filling Machine (BFGJ01)
BFGJ01 AUTOMATIC DESICCANT FILLING MACHINE

Design features:

• PLC system to control the operation.
• This machine is suitable to fill the spacer shaped by the
• Automatic spacer bending machine and the Normal straight pin spacer.
• The filling height can be adjusted according to the size of the aluminum spacer.
• It can feed the needed desiccant automatically.
• It owns the unique and advanced feeding device.
• The key components are supplied by international well-known manufactures.

Parameter:
Desiccant diameter 0.5-0.8mm
Filling aluminum spacer size min 150*150mm
max 2000*2000mm
Filling speed 5-8s(1000*1000mm9A)
Aluminum spacer size 6-24mm
Air supply 0.6MPa
Power supply AC220V,50HZ, 1KW
Figure Dimension 800×800×3650mm
Total Weight 300Kg